Air Actuated Valves
Air Flow Control Valves
Angle Seat Valves
Ball Valves
Butterfly Valves
Cathode Isolation Valves
Check Valves
Coaxial Valves
Control Valves
Cryogenic Valves
Diaphragm Valves
Flow Control Valves
Globe Valves
Hydrogen Back Pressure Regulators
Hydrogen Filter Regulators
Hydrogen Fuel Cell Pressure Regulators
Hydrogen Pressure Reducing Valves
Hydrogen Pressure Relief Valves
Hydrogen Pressure Solenoid Valves
Hydrogen Tank Valves
Needle Valves
On Tank Valves
Plunger Valves
Process Automation Solenoid Valves
Proportional Valves
Safety Valves
Shut-Off Valves
H2 burner NEO324, 10 kW
- H2 burner with ctalytic, flameless, thermal combustion of H2 /air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scale
- Removal of oxygen or hydrogen residues from electrolysis gas e.g. purification of air or helium
- Can also be used as DeOxy-catalyst or DeOxo-catalyst
- Depletion of oxygen or hydrogen in chemical processes
- NOx reduction by means of H2 possible (SCR catalyst)
H2 burner NEO324, 10 kW
- System for flameless hydrogen combustion in a wide concentration range.
- Can also be used as DeOxy-catalyst or DeOxo-catalyst
- Operates outside the ignition limits (only approved for use in the non-explosive range).
- Exothermic reaction using catalysts to combine oxygen and hydrogen creating usable heat energy and water, free of emissions.
Key features
- Catalytic, flameless, thermal combustion of H2 /air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scale
- Fine purification of gases by removing minimal impurities
- Combustion of hydrocarbon-gas mixtures (at elevated starting temperature)
- Catalytic post-combustion of fuel cell exhaust gases or electrolysis gas
- Removal of oxygen or hydrogen residues from electrolysis gas e.g. purification of air or helium
- Depletion of oxygen or hydrogen in chemical processes
- Safety engineering, explosion prevention, fire prevention (through O2 removal)
- NOx reduction by means of H2 possible (SCR catalyst)
- Thermal exhaust purification
Properties
- Suitable for the generation of process heat or conversion of large quantities of hydrogen with a non-hazardous gas composition
- Exhaust gas free of pollutants compared to flame combustion, contains no NOx, CO, CO 2
- High efficiency in H 2 conversion, >99.95 % efficiency when converting H 2 residual <500 ppm. Efficient conversion rate even continued when gassed with H 2 up to 39,000 ppm. Total conversion tested up to 8000 Ltr./h H 2. With dry gas, start of catalysis possible at room temperature
- Suitable for use with simple low-pressure fans due to low flow resistance (example: back pressure <0.5 mbar for cat. D21,18 mm and 600 l/h air flow rate 20°C, 0% r.h.)
- Control of concentration, pressure and gas flow velocity not mandatory
- High moisture tolerance. Condensing moisture at elevated temperature and 100 % RH can be tolerated with appropriate structure
- Corrosion resistant substrate, no carbon corrosion. Due to elastic carrier grid, mechanically not as sensitive as aluminum oxide (no shrinking or breaking)
- Dust-free disassembly/assembly possible for easy maintenance or cleaning
- Removal of deposits is usually easy
- Suitable for removal of hydrocarbons (99.9 %), methane, CO (efficiency depends on temperature)
- Cost-effective and environmentally friendly production
- Low use of precious metals
- Recycling or regeneration possible is most cases
- Modular design for easy adaptation to different systems
- Thermal power of 10 kW
Applications
- Fuel cell applications, purge pulse gases
Contact us
- Interested? Please contact neo systems by filling in the contact vendor or RFQ form.
| Width (in cm) | 7 |
| Weight (in kg) | 3.5 |
| Brand | Neoxid |
| Length (in cm) | 21 |
| Height (in cm) | 21 |
| Manufacturing Readiness (MRL) | 8 |
| Technology Readiness (TRL) | 8 |
neoxid hydrogen AG
As part of the neoxid Group, neoxid hydrogen AG is a German technology company that specialises in high-precision hydrogen measurement technology and pioneering solutions for the hydrogen economy.
We develop and manufacture high-performance sensors, efficient catalysts, and precise measurement technology for use in research and development projects, as well as in industrial applications, all over the world. All our products are manufactured in Germany.
Our mission is to optimise the safety, efficiency and sustainability of the hydrogen industry through intelligent technology. We achieve this by focusing on innovation, adhering to the highest quality standards, and collaborating closely with our customers and partners.
Based on our many years of experience and technological expertise, we are actively shaping the future of hydrogen technology with precision, connectivity and foresight.
Latest products
Browse the Hyfindr Digital Ecosystem
Hyfindr
B2B Suppliers
Hyfindr
Tech Videos
Hyfindr
Tech Knowledge
Hyfindr
Tech Advisory
Hyfindr
Tech Community